HVS Line - CNC Variable Rake Shears

UZMA HVS variable rake shears are produced by construction of Steel into a very rigid structure to allow minimum deflection during the operation. The  rake angle adjustment is done hydraulicaly, reducing the rake gives an advantage in reducing distortion on thin narrow strips also increase the cut quality and cut per minute. Cutting beam on HVS variable rake shears has hardened slide ways working between roller bearings, so lubrication is eliminated and blade clearance adjustment can be done easily in mechanical or hydraulic system. The UZMA HVS variable rake shears  are equipped with CNC control unit. When operator simply enters the material type, thickness, cutting length, cutting width  and the CNC will automatically calculate and set the blade clearence, rake angle and back gauge position accordingly.

HVS Line

● CNC Control - Cybelec DNC 61G

● CNC Controlled cutting length (stroke) adjustment

● CNC Controlled back gauge adjustment

● CNC Controlled Rake Angle adjustment

● CNC Controlled Hydraulic Blade Gap adjustment

● Automatic calculations of cutting functions upon material

   specifications

● Automatic swing-up backgauge

● 1m flip-up openable finger guard with switch protection

 

● Automatic central lubrication

● Back side protection panels & Rear light barrier

● Rear Sheet sliding plates

● Shadow line illumination

● Squaring arm with Ruler & T-Slot & Tilting stop

● Support arms with Ruler & T-Slot & Tilting stop

● Variable cutting angle

● Ball Transfer Tables

● Cutting & return movement hydraulic

 

HSB Line, HSB-E Line - CNC Swing Beam Shears

HSB swing beam shears has Steel constructed  frame with the usage of rigit structural Steel, and by design construction ,machine provides  reliable, fast and accurate shearing. The one piece welded frame is machined at one time on a CNC moving column machining center, the upper beam (swing beam) has a very rigit box frame Steel construction and this allows the rake a angle of the upper blade to be at very low level, this is the point for reducing distortion in the sheared part.  As Standard on UZMA HSB shears, backgauge bar swings with the cutting beam to prevent material from jamming and additionally to feed longer sheets, the backgauge bar swings up automatically after the travel of the backgauge to the end position.  UZMA HSB Line swing beam shears has two  series, HSB-E Series (Economical)  and HSB Series (Standard). HSB Standard Series are the fully hydraulic, heavy duty models and HSB-E Series are the lighter version models with spring system cutting beam return movement.

 

HSB Line

● CNC Control - Cybelec CybTouch 6 (color-touch screen)

● CNC Controlled cutting length (stroke) adjustment 

● CNC Controlled back gauge adjustment

● Pendant control panel

● Automatic calculations of cutting functions upon material specifications

● Automatic swing-up backgauge

● 1m flip-up openable finger guard with switch protection

● Manual Blade gap adjustment

 

● Back side protection panels & Rear light barrier

● Rear Sheet sliding plates

● Shadow line illumination

● Squaring arm with Ruler & T-Slot & Tilting stop

● Support arms with Ruler & T-Slot & Tilting stop 

● Ball Transfer Tables 

● Cutting & return movement hydraulic

 

HSB-E Line

● CNC Control - Cybelec CybTouch 6 (color-touch screen)

● CNC Controlled cutting length (stroke) adjustment 

● CNC Controlled back gauge adjustment

● Fixed Control Panel

● Automatic calculations of cutting functions upon material specifications

● Automatic swing-up backgauge

● 1m flip-up openable finger guard with switch protection

● Manual Blade gap adjustment

 

● Back side protection panels & Rear light barrier

● Rear Sheet sliding plates

● Shadow line illumination

● Squaring arm with Ruler & T-Slot & Tilting stop

● Support arms with Ruler & T-Slot & Tilting stop 

● Ball Transfer Tables 

 

MG Line - Mechanical Shear

The MG line 4 mm series  Mechanical Shears are equipped as standard with ball transfer tables for easier sheet feeding and reducing marking on the materials. The MG line Mechanical Shears are Standard with 750mm motorized ball screw  back-gauge. The MG line Mechanical Shears with Steel construction frame and Reduction Gear is designed for perfect cutting quality of sheet metal. These machines are ideally suited for light gauge metal shearing requirements. The  silent running, direct drive sytem with brake motor and low cost energy-consumption provides efficient operation at an economical price.

MG Line

● NC control

● Motorized Ballscrew Backgauge

● Squaring arm & Front Support Arms

● Ball transfer table (Only on 4mm Series)

● Cutting line Lighting

● Blade  gap adjustment  (Only on 4mm Series)

 

● Cut Counter

● Portable foot pedal with emergency stop button

● Photocell on the back safety guards

 

The MG line Mechanical Shears are Standard with NC control which provides “multi –step” and “touch and go” programming features for the backgauge.